Medical titanium rod It has good physical and chemical properties, low density, light weight, nonmagnetism, high strength, and good corrosion resistance. It has good mechanical properties and welding performance. The products of Baoji titanium rod processing enterprises are widely used in chemical equipment, seawater desalination, ship parts, electroplating industry, etc. The corrosion resistance of titanium is 10 times that of ordinary stainless steel, In addition, titanium is a metal with low human rejection, so the processed parts of medical titanium rods are widely used in human implants and medical devices.

Technical requirements for titanium rod production:

1、 Titanium and titanium alloy bars The chemical composition of materials shall comply with the provisions of GB/T 3620.1, and the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.2 when the Demander re inspects.

2. The diameter or side length of hot worked bar and its allowable deviation shall comply with the provisions in Table I.

3. After hot processing, after turning (grinding) and cold rolling, the allowable diameter deviation of cold drawn bars shall comply with the provisions in Table II.

4. After hot working, the out of roundness of bar after turning (grinding) shall not be more than half of its dimensional tolerance.

5. The unfixed length of bars in processing state is 300-6000mm, and the unfixed length of bars in annealing state is 300-2000mm. The fixed length or multiple length shall be within the range of unfixed length.

When titanium surface is exposed to the atmosphere or aqueous solution, a new oxide film will be automatically generated immediately. For example, the thickness of the oxide film in the atmosphere at room temperature is 1.2~1.6 nm, and it will thicken with time. After 70 days, it will naturally thicken to 5 nm, and after 545 days, it will gradually increase to 8~9 nm. Artificial enhanced oxidation conditions (such as heating, using oxidants or anodic oxidation) can accelerate the growth of surface oxide film and obtain thicker oxide film, thus improving the corrosion resistance of titanium. Therefore, the oxide film formed by anodic oxidation and thermal oxidation will significantly improve the corrosion resistance of titanium. Now customers of medical titanium rod manufacturers have made many similar products with our titanium rod and titanium wire, which shows that this is a feasible way. 　

The content of this article comes from the network. If you have any questions, please contact me to delete it!